Please read THESE INSTRUCTIONS carefully and completely BEFORE STARTING!

Firstly: thank you for choosing Allied. It's great to have you on board. The M.O.A.B represents the pinnacle of our performance PCs, designed to shock and awe in both presentation and power. Great call! 

UNBOXING THE M.O.A.B

1. From the box's flat transport position, tip the box in the direction indicated by the arrows on the box, to stand it upright on its thin side.
2. Slice the tape, open, and push back all 4 outer box flaps.
3. Slice the tape, open, and push back all 4 inner box flaps.
4. Carefully slide the system out of the box in an upright position. Don't worry if some of the looser packaging foam drops off - it's supposed to at this point.
5. Carefully remove all remaining foam, including the bottom supporting pieces. You will need to careful. Tilt the system to the front and back edges to remove the bottom foam pieces.
6. Remove the outer bag.
7. Using correct lifting technique, lift the system into your desired position. We strongly recommend a two-person lift when lifting the M.O.A.B, as the weight exceeds 20kg.
   
   Note: it is not recommended to lift the PC by the black handles alone. The best supportive lifting position is with both hands, underneath the system (holding the bottom tray).

HANDLING AND MOVING THE M.O.A.B. 

As you can see, this thing is BIG. We strongly advise at least two people are present when unboxing, lifting and moving this PC. To avoid injury, be sure to lift with proper posture - bend your knees and lift with a straight back, using your legs to lift, not your back. Do not rotate or twist your back while lifting or carrying it. 

To reduce the weight of the system while positioning it, you can remove the tempered glass side panels. Unscrew the tempered glass side panel screws on both sides of the PC, and place them inside the protective padding provided for safe keeping. Screw them back into place when you've got it where you want it. Do not drop them or place them down on hard surfaces like tiles (carpet, bedding or their protective foam is a much better option to lay them down on), and be sure to support their full weight when lifting/repositioning them.

Remember: It is not recommended to lift the PC by the handles alone. The best method of lifting and carrying the M.O.A.B. is with two people, with both hands underneath the PC. 

The black handles on top of the system can be used to rotate the PC when it is on a flat surface. Due to the assymetrical position of the handles, angular nature of the case and weight of the PC, lifting the system by the handles alone will cause the front edge opposite the handles to rotate downwards. So, when maneuvering the M.O.A.B. with the handles, ensure the front edge of the PC is supported at all times. 

PROTECTIVE PACKAGING 

The PC comes with protective packaging inside the system, to protect the internal components during transit. Ensure this is fully removed before switching it on.

DO NOT DISCARD THE INTERNAL PACKAGING - YOU WILL NEED TO PLACE IT BACK INSIDE SHOULD IT NEED TO BE TRANSPORTED AGAIN.

WE REPEAT: DO NOT THROW ANY OF THE PROTECTIVE PACKAGING AWAY, BOXES INCLUDED. 

QUESTIONS? 

If in doubt about any of this, the best thing to do is call us on 1300 804 555, or email [email protected]. We'll talk you through it.